Basic Maze Robot (2 KT06 or KT01)
This basic maze-following robot follows walls to navigate a maze made of wo=
oden blocks. The robot has two Distance Cubelets and two Drive Cubelets. =
It turns away from a wall when it gets too close. You'll need two KT06 ki=
ts to build this robot, or one KT01 kit.
- Battery Block
- Distance Block
- Distance Block
- Drive Block
- Drive Block
- 1) Build two sub-assemblies: Two Distance Cubelets (facing to opposite sides) and two Drive Cubelets (both facing the same direction).
- 2) Put the two sub-assemblies together, with the Distance Cubelets in front.
- 3) Finally add a Battery to the robot and try it in a maze.
| Two sub-assemblies - Drive and Distance | Both Drive Cubelets face the same direction |
| |
|
| the Basic Maze robot | The Distance Cubelets face outward; Drive Cubelets forward |