Predator-Prey
These are two seperate robots. The predator robot chases the prey robot. Ea=
ch consists of 1 battery, 1 distance and 2 drives. The drives are the only =
blocks that are reprogrammed. The prey drives uses code 13572.c and the pre=
dator drives use code 7956.c. The predator moves forward until it gets clos=
e to the prey. The prey moves away if it detects a predator close to it.
- Battery Block
- Distance Block
- Drive Block (reprogrammed with Cubelet.13572.c)
- Drive Block (reprogrammed with Cubelet.13572.c)
- Battery Block
- Distance Block
- Drive Block (reprogrammed with Cubelet.7956.c)
- Drive Block (reprogrammed with Cubelet.7956.c)
- reprogram two drives with the predator code and two other drives wth the prey code
- build one robot by connecting drive-battery-drive in a line plus a distance pointing out
- do the same for the other robot
- make sure all the drives in one robot goes in the same direction
- you can play around with the position of each block in a robot to increase stability or ability to go in a straight line
- try different starting positions/orientations and see who wins!
| Predator-prey | |